I arrived yesterday and went to see the Mt. Elliott Makerspace at 10 this morning. The space is located in the basement of the Church of the Messiah close to downtown Detroit.
The space is closed to the public right ow to prepare for after-school-classes so there wasn’t much going on today. I had a very interesting interview with Ted, who is one of the guys running the space.
The classes in Mt: Elliott focus on making and repairing stuff with children, not necessarily digitally. For example there is a bike workshop where every Kid can build it’s own bicycle from donated used parts.
I also found a wind turbine that one can buy as a kit.
I will use tomorrow to catch up with my documentation and work on the next version of my windmill. I’ll be back a Mt Elliot Makerspace on Thursday.
After going shopping (and getting wet) in a big thunderstorm I went to the open session in the CUC Fab Lab for a last time. I covered the wings of the turbine skeleton with thin polystyrene sheets, build a larger support and, due to lack of real wind that evening, switched on the Fan…
And it works! Despite the blades being very far from a real profile (I lasercut a NACA 0015) the turbine spins in pretty light winds.
Putting the styrene on the outside of the lasercut profile pretty much destroys the shape of the profile and creates a horrible leading edge but it was the quickest way to get things going.
To make it work more effectively I have to change the construction of the wings to actually match the original profile shape.
Tonight I am going to Chicago for the weekend and a concert, next week I’ll be in Detroit to work on the next version…
I had two really interesting Days at the Champaign Urbana Community Fab Lab. There is an open Session every Tuesday and Thursday night from 6 – 9PM where veryone can come to the Lab and work on their project.
I Didn’t get much work done on Tuesday due to al lack of the right material for my turbine (1/8 inch plywood) so I spend the Evening talking to people, looking at other projects and watching how the Lab operates during the open sessions. Everyone working at CUC Fab Lab is a volunteer and there is a very nice, very busy cooperative spirit during these sessions.
I spend wednesday morning to gather the material I needed so I could work on my second prototype all afternoon. It’s turning nicely but I have to figure out a way to vover the twisted wings with a surface which turned out to be not as easy as I imagined :p
Make sure you check out the Wind Turbine Page.
I will seek advice at the local RC shop today.
Again just a very brief update:
As the Fab Lab in Champaign does not open before 6 PM I spend my Afternoon at Starbucks (they have wireless and electricity) preparing the second version of my wind turbine. I am heading to the lab now, hopefully I get it made tonight
I had a pretty short ‘Working Day’ at the Champaign Urbana Community Fab Lab today. Mercedes, who is one of the persons who run the lab showed me around and we had a brief Discussion about the Lab and my research.
The lab is open to the public on Tuesdays, Thursdays and Sundays so i hope I can get to know some more Details tomorrow and also work on my project.
I used todays time to go over my interviews, take notes and for further scheduling. I also divided the Blog into more pages to make it easier to follow the wind turbine progress vs. the research blog.
Tomorrow I’ll drive to Champaign Urbana to spend the week in the Champaign-Urbana Community Fab Lab.
On Tuesday evening I left the museum around 7 pm and Dan took me to a Hackerspace named Pumping Station One. They just moved into a bigger space and getting organized there. A hackerspace has about the same tools as a Fab Lab but it’s more community-driven / self organized.
Second Day at MSI
I had a quite productive day At the Fab Lab Yesterday. I participated in a workshop for museum guests and made a Keychain.
The workshop was very well planned, It took about 45 minutes for 10 People to design and produce their individual Keychains.
I kept my design quite close to the original Logo of a major German car brand…
After the workshop I had a very interesting Discussion about developing workshops for Fab Labs with Matt, who is the Fab Lab’s program coordinator. He also made sure I was 3D-scanned.
Instead of having me 3D-printed I printed a small model of a Vertical-Axis-Wind-Turbine that I found on Thingyverse.
I spend the rest od the afternoon building a bigger, laser-cut-model from plywood parts. The next step will be to add an axis and cover the wings to actually make it spin
Finally I spend a fun evening with my Couchsurfing Host Mark and his friends in the Wicker Park Neighbourhood.
This morning I drove into Chicago to start with my research at the Museum of Science and Industry.
I was welcomed by Dan Meyer, the Fab Lab Fab Lab Manager at MSI. He gave me a short tour of the museum and we had a very interesting talk about how the Fab Lab in the museum runs.
I also started to work on my Wind Turbine Project, hopefully I will be able to build the first Prototype tomorrow.
Now we are going to continue to the Hackerspace Pumping Station: One, I’ll be back at the Fab Lab tomorrow.
I arrived last Sunday at Chicago O’Hare and am staying with my Cousin Doug and his family in Niles, Michigan. Tomorrow I will have my first visit at an actual Fab lab in the Wanger Family Fab Lab in the The Museum Of Science and Industry, Chicago.
This is Doug’s Dog oliver.
I’ll write more tomorrow.